Maintenance And Safety Production Of Rice Noodle Machine

Rice noodle machine debugging and use:
1. Before running, we should first check whether the components are complete, whether all the connecting bolts are fastened, then turn the wheel with the hand to observe whether the running parts are flexible and light, so that there will be no running obstacles.
2. Injection lubricating oil: the reducer should be injected with mechanical oil in the air hole, and the depth of the oil surface is about 50mm (about 4 liters or so).
3. Empty machine running in: after checking and refueling, it can start running and running for 2 hours, confirm that no impact, no abnormal vibration and noise and various parts of oil leakage phenomenon, it can be put into production.
 
Maintenance and safety production of rice noodle making machine:
1. After each stop, it should be carried out in the following order. Wait until the raw material is emptied. Disassemble a section of the front of the cooked material and open a section of the front of the vermicelli barrel.
2. Along the direction of spiral rotation, use a special wrench to unscrew each spiral, take the screw, soak water for cleaning, and then reload.
3. For the blockages of serious screen, can be boiled in boiling water, after a period of time to clean, not to use fire to prevent deformation.
4. In addition to the cleaning of the components, it is necessary to clean the dust on the surface of the machine.
5. Check the looseness of various parts regularly, find loose, fasten immediately.
6. Lubricating oil, reducer just replace the fortunes once a month first, then you need replace every six month.
7. Feed, please do not use hand to push material machine cavity, prevent the spiral rolling to the finger, do not use iron to prevent iron into the spiral, damage to the machine, remove the aging barrel, cavity with steam, using hand counterclockwise rotation of large pulley 2 - 3 laps, until the vapor is discharged, then remove.